peach post fence connection、installation

Author:HeBei Boyang hardware wire mesh products Co., Ltd. Production Capacity:12 kilometers/day
Tel:86-318-7967717 / 7967727
Fax:86-318-7967737
E-mail:sales@wiremesh-factory.net
Related Products: Dirickk Axis Fence,Peach shape fence post、flange plate、rain hatpacking and transportation

When connect the panel and the post, we do not use any fastenings. However we can effectively prevent picked, and assure the safety of the fence.

We usually use the flange fix and ground embed fix. The space between the panel and the ground is about 50—100mm. Use the concrete embed fix , the depth is about 200mm. Use the normal ground fix, the depth is about 400mm. It is better to weld two pieces of cross reinforcing steel or firm two brick, and use the post to support the welded fence panel in case the invader extract the fence.

Cut a Gap in the Bending Place of the Panel to Connect the Linker of the Post

Cut a Gap in the Bending Place of the Panel to Connect the Linker of the Post BY-1

Make the Panel and the Post at the Same Level, and Connect the Panel and Post

Make the Panel and the Post at the Same Level, and Connect the Panel and Post BY-2

Peach Flange Plate Insert Connection Point

Peach Flange Plate Insert Connection Point BY-3

Peach Flange Plate Welded Connection Point

Peach Flange Plate Welded Connection Point BY-4

Square Post Flange Plate

Square Post Flange Plate BY-5

Pre-burying Peach Post Fence

Pre-burying Peach Post Fence BY—6

Semi-Y Peach Post Fence

Semi-Y Peach Post Fence BY-7

Semi-Y Peach Post Fence

Semi-Y Peach Post Fence BY-8

Related Products: Dirickk Axis Fence,Peach shape fence post、flange plate、rain hatpacking and transportation

Customer Feedback:13780285808        E-mail:sales@wiremesh-factory.net

link